Enable and disable screen mirroring and digital signage
Ditto allows you to enable or disable screen mirroring and digital signage on receivers.
Note:
- These instructions only apply to receivers running the Ditto Receiver application.
- Legacy receivers cannot run the Ditto Receiver application.
- Make sure a receiver is paired to the room you are editing to see the full list of customization options here.
Enable or disable screen mirroring
- In the Ditto Account Portal, click Rooms, then All Rooms.
- Click the room containing the receiver(s) you'd like to edit.
- In the Room settings card, under Mirroring & Signage Settings, turn Enable Mirroring on or off.
- Click Save changes.
Screen mirroring is now enabled or disabled for the receivers in this room.
When screen mirroring is enabled, you have the option to choose whether or not to display connection info on the display your Ditto receiver is connected to. End-users will now see the room code when there is a mirroring connection to the receiver or digital signage is displayed.
Note:
By default, the Always Show Connection Info setting will be enabled for all created rooms unless manually disabled.
Show connection info
- In the Ditto Account Portal, click Rooms, then All Rooms.
- Click the room containing the receiver(s) you'd like to edit.
- Under Mirroring & Signage Settings, turn on Enable Mirroring.
- Turn on Always Show Connection Info.
- Click Save changes.
When the Always Show Connection Info switch is on:
- Screen mirroring is always enabled
- Screen mirroring connection info will be shown while signage is displayed
- Connection info is shown while other devices are mirroring
When one user is screen mirroring, up to three more users can mirror their devices at the same time to a Ditto Receiver. Additional users will be able to easily view the Ditto room code and connect.
Enable screen mirroring and digital signage together
You can enable both screen mirroring and digital signage at the same time. This allows Ditto receivers to instantly switch between digital signage and screen mirroring whenever a user initiates a connection.
When screen mirroring and digital signage are both enabled, digital signage will display by default until a user connects to the receiver. Screen mirroring connection information is overlaid in the corner of digital signage.
When a user connects their device, the receiver will display the user's screen. When a user disconnects their device, the receiver will automatically revert to displaying signage.
- In the Ditto Account Portal, click Rooms, then All Rooms.
- Click the room containing the receiver(s) you'd like to edit.
- Under Mirroring & Signage Settings, turn on Enable Mirroring and Enable Signage.
- Turn on Always Show Connection Info.
- You may also select which corner of the screen the connection infobox is displayed.
- Click Save changes.
Now digital signage will display on the receivers in this room and users can instantly transition between viewing digital signage and screen mirroring their devices.
Note:
If mirroring is enabled and the Always Show Connection Info switch is turned off, users will not be able to see connection info while signage is displayed, but they will still be able to screen mirror to the display if they know the room code.
Enable or disable digital signage
You can enable or disable digital signage on certain displays. Digital signage is enabled by default.
If you disable digital signage for a Ditto room, receivers will show only the following:
- Screen mirroring connection information (if screen mirroring is enabled)
- In the Ditto Account Portal, click Rooms, then All Rooms.
- Click the room containing the receiver(s) you'd like to edit.
- Under Mirroring & Signage Settings, turn Enable Signage on or off.
- Click Save changes.
Digital signage is now enabled or entirely disabled for the receivers in this room.