When launching Reflector Student on your iOS device, you will be presented with 3 connection options: Auto-Discovery, Connect with Code, or Link with Camera. Any of these options will effectively link your iOS device to your installation of Reflector Teacher, some additional details on how and when you use each option is included below.
If you have used your iOS device to mirror to Reflector Teacher, then you are already familiar with this option. Auto-Discovery will use the same methods that your iOS device uses to automatically detect Reflector Teacher when you are using Airplay to connect your device. This happens over your wifi network or with Bluetooth if you have a Mac using a compatible Bluetooth chip. Tap on Auto-Discovery and you will be presented with a list of detected computers running Reflector Teacher. Tap on your computer name to connect and view any mirrored devices.
If your device can not auto-detect the computer running Reflector Teacher, then you can use one of the other options. To use these, you will need the QR or Quick connect code. The Quick Connect code is displayed in your Reflector Teacher menu, and you may view the QR code by clicking on the Quick Connect area of the Reflector Teacher menu:
Clicking the code will bring up a window which displays both the Quick Connect code and the QR code for connecting with a camera.
Quick Connect code
If your devices can not see each other using the Auto-Discovery option, then you may tap on the Connect with Code option in Reflector Student. This will prompt you to enter the Quick Connect code. Using this method will bypass the automatic discovery process and allow you to connect directly with Reflector Teacher. This can be very useful if your device and Reflector Teacher are on different network segments, for example a student network which is separate from the faculty network. When your device has connected with Reflector Student, it will share the connection information so that other devices on the same network segment may then begin to use the Auto-Discovery method to connect.
Link with Camera
This method will access your device camera. Connecting in this way is the same as entering the Quick Connect code, however the process is streamlined by simply using the device camera to scan a QR code with the appropriate connection information embedded.